iQuantize
Download
- Home
- Compatibility
- 2box DrumIt Five / DrumIt Three
2box compatibility
Does the 2box DrumIt Five / DrumIt Three work with iQuantize?
Everything you need to connect your 2box DrumIt Five / DrumIt Three to an iPhone, iPad or Mac and start getting scored feedback on your playing.
Updated 3 August 2026
Yes. 2box modules use a note layout unlike anyone else's, and iQuantize ships a 2box map for it — including reading the hi-hat pedal controller for openness.
- Works with iQuantize
- Yes — on iPhone, iPad and Mac. Automatic
- Kits using this module
- DrumIt Five MKII, DrumIt Three, DrumIt Five
- Module port
- USB-B (square “TO HOST” / “USB COMPUTER” socket)
- Cable to a USB-C device
- USB-B to USB-C data cable
- Cable to a Lightning iPad
- Powered Apple Lightning to USB 3 Camera Adapter plus the module's USB cable
- Pad mapping
- Recognized as a 2box module and mapped automatically on the 2box pad layout. Any pad can be reassigned in the Pad MIDI Mapper.
- Hi-hat
- Hi-hat openness rides on a continuous controller rather than separate notes, so the app reads the pedal position to decide open versus closed. 2box modules are configurable, so the app reads the usual controller and falls back to the alternate one.
- Requirements
- iOS/iPadOS 17 or later, or macOS 14 Sonoma or later
How to connect it
About two minutes, once. Whatever the cable, it must be a data cable. A charge-only USB cable fits the socket and passes no MIDI, which is the single most common reason a kit never appears.
- Power the 2box DrumIt Five / DrumIt Three on and find its USB port — USB-B (square “TO HOST” / “USB COMPUTER” socket).
- On a Mac, iPhone 15 or later, or a USB-C iPad: connect a USB-B to USB-C data cable straight from the module to the device.
- On an iPad with a Lightning port: use a genuine Apple Lightning to USB 3 Camera Adapter, plug a charger into its Lightning power port, then connect the module. Why this is required.
- Open iQuantize. The module is picked up automatically — no pairing, no settings to change.
- Play a few pads to confirm each one lands on the right drum. If one is off, fix it in Settings → MIDI → Pad MIDI Mapper.
- Pick a groove and play a take. You get a verdict, what slipped, and one thing to do next.
Plug the kit in and see what your playing actually looks like
iQuantize scores every take against the chart, tells you what slipped, and picks the next groove for your level.
Requires an electronic drum kit or a MIDI-capable drum module.
Checking and fixing the pad mapping
Recognized as a 2box module and mapped automatically on the 2box pad layout. Any pad can be reassigned in the Pad MIDI Mapper.
To check it, open Settings → MIDI → Pad MIDI Mapper and hit each pad. The mapper shows the incoming note and which drum it is currently driving. To change one, select the drum on screen first, then hit the physical pad that should play it, and save.
The mapping is stored for this module specifically, so it is restored automatically the next time you connect. A change you make yourself is never overwritten by automatic detection.
Known quirks on this module
- Cymbal choke grabs are ignored rather than counted as strikes — they are not notes, and scoring them would penalise correct playing.
Common questions
Does the 2box DrumIt Five / DrumIt Three need any driver or app-side setup?
No. It is class-compliant over USB-MIDI, so your iPhone, iPad or Mac sees it as soon as it is plugged in with a data cable and powered on. There is no driver to install and no pairing step.
Can I hear the module's own sounds while using iQuantize?
Yes, and it is the lowest-latency option. Monitor your playing through the module's headphone output while the app plays the chart through your device. iQuantize scores the MIDI either way.
What if a pad lands on the wrong drum?
Open Settings → MIDI → Pad MIDI Mapper, select the drum you want on screen, then hit the physical pad. Save. Your change is stored for this module and is never overwritten by automatic detection.